iPhone VoIP Settings

If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

You can configure your iPhone with Vbuzzer VoIP service to save money on domestic and international long distance calls.

To do this you will need an unlocked iPhone with firmware version 1.1.2, or 1.1.3, or 1.1.4, and installer.app installed.

Then follow this configuration tutorial step by step, you will get the job done.

I. Install a 3rd party sip client on your iPhone,

iphone_000.jpg

Step 1. Make sure your wifi is connect to internet

iphone_001.jpg

Step 2. Go to the installer

iphone_002.jpg

Step 3. Go to ‘Sources’ tab , and click on ‘Edit’

iphone_004.jpg

Step 4. Click ‘Add’, input the url: http://209.47.41.2/land/114.xml, then click ‘OK’

iphone_005.jpg

Step 5. Click ‘Done’, You can find ‘SipVoip1.1’ added to your sources.

iphone_0061.jpg

Step 6. Click ‘Install’, go to the install tab:

Step 7. Find out the ‘SipVoip1.1’ in the Categories, and click ‘>’:

iphone_0071.jpgStep 8. Click ‘Install’ on the top:

iphone_009.jpg

Step 9. Confirm the installation.

Press the Home key on your iphone, go back to the main menu.

A new logo ‘SipVoip’ should be added to your iPhone.

iphone_010.jpg

Click ‘SipVoip’

iphone_011.jpg

II. Set up your Vbuzzer account within SipVoip.

Step 10. Click ‘Settings’:

Enter your vbuzzer username and password here.

iphone_012.jpg

If you don’t yet have a vbuzzer account, you can always use your PC to download and register an account from here:

http://www.vbuzzer.com/download.php

Step 11. Save your settings

Click on ‘Dial’ on the dial pad.

Click on ‘Sip’ and see the light up, now you can make Vbuzzer voip calls.

iphone_013.jpg

iphone_014.jpg

You can also receive calls if you have a phone number applied from vbuzzer.

iphone_015.jpg

Notes:

The sip client SIP-VOIPv1.1 for iPhone is developed by:

http://touchmods.wordpress.com/

This software isn’t perfect but is improving fast. Areas that need improvements include:

1. The voice is only coming out of iPhone headset, not the speaker.

2. The voice volume is small.

3. Mono voice.

4. It can not run in the background, if you press ‘HOME’ key, the program will close, so you can not receive incoming calls.

5. It can not auto register to a service by itself, you have to click on ‘SIP’ to register it.

Popularity: 61% [?]